Crimping tools from HILPRESS
Discover our crimping pliers for cable lugs, wire end ferrules and flat receptacles to make secure electrical connections.
Versions
You can find the right product for you using our practical filters.
|
Article no.
|
Image |
Name
|
Application area
|
Pressing mold
|
Width
mm
|
Profile for cable cross-section
mm²
|
|---|---|---|---|---|---|---|
| 11610 |
|
Crimping Pliers for Wire End Sleeves, 0,2 - 6,0 mm² / 2 x 0,5 bis 2 x 2,5 mm² |
Application area
for wire end ferrules
|
Pressing mold
Half-round pressing
|
Width
mm
|
Profile for cable cross-section
|
| 11620 |
|
Crimping Pliers for Wire End Sleeves, 0,5 - 16 mm² / 2 x 0,5 bis 2 x 6 mm² |
Application area
for wire end ferrules
|
Pressing mold
Half-round pressing
|
Width
mm
|
Profile for cable cross-section
|
| 11622 |
|
Crimping Pliers for Wire End Sleeves, 0,5 - 2,5 mm² / 2 x 0,5 bis 2 x 1 mm² |
Application area
for wire end ferrules
|
Pressing mold
Half-round pressing
|
Width
mm
|
Profile for cable cross-section
|
| 11747 |
|
Crimping tool for flat connectors and sleeves without insulation, 0.1 - 1 mm² |
Application area
|
Pressing mold
Rollcrimppressung
|
Width
2,8
mm
|
Profile for cable cross-section
0,1 – 1
mm²
|
| 11700 |
|
Crimping Tool for Preinsulated Terminals, 0,5 - 6,0 mm² |
Application area
für Kabelschuhe mit Isolation
|
Pressing mold
Oval pressing
|
Width
mm
|
Profile for cable cross-section
0,5 – 6
mm²
|
| 11730 |
|
Crimping Tool for preinsulated Terminals, 0,5 - 6,0 mm² |
Application area
für Kabelschuhe mit Isolation
|
Pressing mold
Oval pressing
|
Width
mm
|
Profile for cable cross-section
0,5 – 6
mm²
|
| 11401 |
|
Crimping Tool for Push on Terminals (Male/Female) without Insulation, Repare Pliers, 0,5 - 2,5 mm² |
Application area
|
Pressing mold
Rollcrimppressung
|
Width
4,8 + 6,3
mm
|
Profile for cable cross-section
0,5 – 2,5
mm²
|
| 11020 |
|
Crimping Tool with Positive Lock, 10 + 16 mm² |
Application area
für Kabelschuhe ohne Isolation
|
Pressing mold
Mandrel pressing
|
Width
mm
|
Profile for cable cross-section
10 + 16
mm²
|
| 11746 |
|
Crimpwerkzeug für Flachstecker und Hülsen ohne Isolation, Reparaturzange, 0,5 - 2,5 mm² |
Application area
|
Pressing mold
Rollcrimppressung
|
Width
4,8
mm
|
Profile for cable cross-section
0,5 – 2,5
mm²
|
| 11748 |
|
Crimpzange für blanke Flachstecktechnik |
Application area
|
Pressing mold
Rollcrimppressung
|
Width
6,3
mm
|
Profile for cable cross-section
0,5 – 2,5
mm²
|
| 11732 |
|
Crimpzange für blanke Flachstecktechnik |
Application area
|
Pressing mold
Rollcrimppressung
|
Width
2,8 + 6,3 + 9,5
mm
|
Profile for cable cross-section
0,5 – 6
mm²
|
| 11756 |
|
High-Quality Hexagonal crimping tool CLARA for wire end sleeves, 0,08 - 16 mm² / 2 x 0,25 - 2 x 10 mm² |
Application area
for wire end ferrules
|
Pressing mold
Hexagonal pressing
|
Width
mm
|
Profile for cable cross-section
|
| 11757 |
|
High-Quality square crimping tool CLARISSA for wire end sleeves, 0,08 - 16,0 mm² / 2 x 0,25 - 2 x 6 mm² |
Application area
for wire end ferrules
|
Pressing mold
Square pressing
|
Width
mm
|
Profile for cable cross-section
|
| 11740 |
|
High-Quality-self-adjusting crimping tool CARLA for wire end sleeves, 0,08 - 16 mm² / 2 x 0,25 - 2 x 10 mm² for front and side entry |
Application area
for wire end ferrules
|
Pressing mold
Trapezoidal pressing
|
Width
mm
|
Profile for cable cross-section
|
| 11640 |
|
HP-DUO® Crimping Tool for Wire End Sleeves, 0,5 - 2,5 mm ² / 2 x 0,5 bis 2 x 1,0 mm² |
Application area
for wire end ferrules
|
Pressing mold
Trapezoidal pressing
|
Width
mm
|
Profile for cable cross-section
|
| 11641 |
|
HP-DUO® Crimping Tool for Wire End Sleeves, 4 - 16 mm² |
Application area
for wire end ferrules
|
Pressing mold
Trapezoidal pressing
|
Width
mm
|
Profile for cable cross-section
4 – 16
mm²
|
| 11550 |
|
HP-Master Crimping Tool for Push on Terminals (Male/Female) without Insulation, 0,5 - 1,5 mm² |
Application area
|
Pressing mold
Rollcrimppressung
|
Width
6,3
mm
|
Profile for cable cross-section
0,5 – 1,5
mm²
|
| 11530 |
|
HP-Master Crimping Tool for Push on Terminals (Male/Female) without Insulation, 0,5 - 2,5 mm² |
Application area
|
Pressing mold
Rollcrimppressung
|
Width
6,3
mm
|
Profile for cable cross-section
0,5 – 2,5
mm²
|
| 11731 |
|
HP-Master PROFILINE Crimping Tool for preinsulated Terminals, 0,5 - 6,0 mm² |
Application area
für Kabelschuhe mit Isolation
|
Pressing mold
Oval pressing
|
Width
mm
|
Profile for cable cross-section
0,5 – 6
mm²
|
| 11799 |
|
HP-Master® Body for quick exchangeable dies |
Application area
für auswechselbare Gesenkeinsätze
|
Pressing mold
|
Width
mm
|
Profile for cable cross-section
mm²
|
| 11758 |
|
HP-MASTER® crimping pliers especially for UL wire end ferrules, 0.14 - 10 mm² |
Application area
for wire end ferrules
|
Pressing mold
Square pressing
|
Width
mm
|
Profile for cable cross-section
0,14 – 10
mm²
|
| 11733 |
|
HP-Master® Crimping tool for non-insulated terminals, 0,5 - 10 mm² |
Application area
für Kabelschuhe ohne Isolation
|
Pressing mold
Mandrel pressing
|
Width
mm
|
Profile for cable cross-section
0,1 – 10
mm²
|
| 11741 |
|
HP-MASTER® Crimping Tool for UL Wire End Sleeves, 0,25 - 6,0 mm² |
Application area
for wire end ferrules
|
Pressing mold
Trapezoidal pressing
|
Width
mm
|
Profile for cable cross-section
0,5 – 6
mm²
|
| 11743 |
|
HP-MASTER® Crimping Tool for UL Wire End Sleeves, 10 - 25 mm² |
Application area
for wire end ferrules
|
Pressing mold
Trapezoidal pressing
|
Width
mm
|
Profile for cable cross-section
10 – 25
mm²
|
No problem - we also offer customized solutions outside our standard range. Simply let us know your requirements using our inquiry form. We will be happy to advise you personally!
