Heat shrink tubing and heat shrink caps with shrink ratio from 2:1 to 4:1

Heat shrink tubing thin wall 2:1

Heat shrink tubing HQ 2:1 thin wall, self-extinguishing

This is a thin-walled, flexible and self-extinguishing heat shrink tubing made of radiation crosslinked polyolefin. The shrink ratio is 2:1, the shrink temperature is over +120 °C and the continuous use temperature is -55 °C to +125 °C. This product is available as a box in black, green/yellow, white, red, blue, yellow, green, transparent, brown, gray and orange, as a spool in black, yellow/green, white, red, blue, yellow, green, transparent, brown and gray, as an assortment box in black or as individual sections with minimum 5 mm and maximum 300 mm in black, green/yellow, white, red, blue, yellow, green, transparent, brown and gray.

  • Approved to UL 224, 105 °C

Transparent versions are not self-extinguishing and therefore not approved according to UL 224.

Heat shrink tubing HF 2:1 thin wall, self-extinguishing, halogen-free

This is a halogen-free general purpose heat shrinkable tubing made of radiation crosslinked polyolefin for insulation and jacketing. The shrink ratio is 2:1, the shrink temperature is above +90 °C and the continuous service temperature is between -55 °C and +105 °C. The general purpose heat shrink tubing is available as box or reel in black color only.

Heat shrink tubing XTF 2:1 thin wall, self-extinguishing, halogen-free

This general purpose heat shrink tubing is halogen free, self-extinguishing and has a polyolefin jacket for insulation. The shrink ratio is 2:1, the shrink temperature is above +125 °C and the continuous service temperature is between -55 °C and +125 °C. This product is available as a coil in black, green/yellow, white, red, blue, yellow, green, transparent, brown, gray and as a box additionally in orange.

  • Approved according to UL 224 (except transparent version)
  • UL approved

Heat shrink tubing TF 2:1 thin wall, non self-extinguishing

This is a thin-walled, flexible general-purpose heat shrink tubing made of radiation crosslinked polyolefin. Unlike the XTF 2:1, it is not self-extinguishing. The shrink ratio is 2:1, the shrink temperature is over +120 °C and the continuous service temperature is between -55 °C and +105 °C. This product is only available in black.

Heat shrink tubing 876 2:1 thin wall, self-extinguishing

This is a thin-walled, very flexible, self-extinguishing heat shrink tubing made of radiation crosslinked polyolefin. The shrink ratio is 2:1, the shrink temperature is above +120 °C and the continuous service temperature is between -55 °C and +135 °C. It is available in black, white, red, blue, yellow and green.

  • Approved to UL 224 VW1, Mil-l-23053, DEF STAN 59-57 issue 3
  • UL approved

Heat shrink tubing HKN 2:1 thin wall, self-extinguishing

This mechanically resistant heat shrink tubing with medium stiffness is suitable for high temperatures. It is made of polyvinylidene fluoride. The shrink ratio is 2:1, the shrink temperature is above +170 °C and the continuous service temperature is between -55 °C and +175 °C. This shrink tubing is available in transparent version only.

  • Approved according to UL 224 VW1, Mil-DTL-23053/8 VG 95343 Pt 5

Heat shrink tubing Thin wall 3:1 and 4:1

Heat shrink tubing HQ 3:1 thin wall, self-extinguishing

This thin-walled, flexible heat shrink tubing is made of self-extinguishing radiation-cured polyolefin. The shrink ratio is 3:1, the shrink temperature is above +100 °C and the continuous service temperature is between -55 °C and +135 °C. This product is available as a box in black and as a coil in black, white, red, blue, yellow, green and transparent.

The transparent version is not self-extinguishing!

  • Approved according to UL 224 125 °C, MIL-AMS-DTL-23053/5, DEF STAN 59-57

Heat shrinkable tubing HFD 3:1 thin wall, self-extinguishing, halogen-free, for printing

This is a printable, flat, halogen-free self-extinguishing heat shrink tubing made of polyolefin. The shrink ratio is 3:1, the shrink temperature is over 100 °C and the continuous use temperature is between -55 °C and +135 °C. This product is only available in white and yellow. However, printable sections are available upon request.

Heat shrinkable tubing HQ 3:1 ISK thin wall, self-extinguishing, with inner adhesive

This is a thin wall, semi-rigid heat shrink tubing made of radiation crosslinked polyolefin that is self-extinguishing and has a hot melt adhesive coating on the inside. The shrink ratio is 3:1, the shrink temperature is above +95 °C and the continuous service temperature is between -55 °C and +110 °C. This product is available as a coil or in sections in black only - other colors are available upon request.

Transparent versions are not self-extinguishing!

  • Approved according to MIL-I-23053/4

Heat shrink tubing XTF 3:1 thin wall, self-extinguishing, halogen-free

This general purpose heat shrinkable tubing is halogen free, self-extinguishing and has a polyolefin insulation and jacket. The shrink ratio is 3:1, the shrink temperature is above +125 °C and the continuous service temperature is between -55 °C and +125 °C. This product is available in black color only.

  • Approved according to UL 224

Heat shrink tubing HQ 4:1 ISK thin wall, self-extinguishing, with inner adhesive

HQ 4:1 ISK heat shrink tubing is a thin wall, semi-rigid, self-extinguishing heat shrink tubing made of radiation crosslinked polyolefin with an internal hot melt adhesive coating. The shrink ratio is 4:1, the shrink temperature is above +95 °C and the continuous service temperature is between -55 °C and +110 °C. It is only available in black. Other colors are available upon request.

  • Approved according to MIL-I-23053/4

Heat shrink tubing HFTE 4:1 thin-walled, non-flammable, PTFE

These Teflon® medium stiffness heat shrink tubing are suitable for very high temperatures. HFTE heat shrink tubing is made of polytetrafluoroethylene and is only available in transparent with a light bluish tint. The shrink ratio is 4:1, the shrink temperature is above +327 °C and the continuous service temperature is between -67 °C and +250 °C.

Shrink tubing medium and thick wall 3:1

Heat shrinkable tubing CFM 3:1 medium wall, flame retardant

This is a medium wall (CFM) heat shrinkable tubing made of radiation crosslinked polyolefin with an internal hot melt adhesive coating. CFM heat shrinkable tubing is ideal for protecting cable joints and terminations up to 600 V. The shrink ratio is approximately 3:1, the shrink temperature is above +120 °C and the continuous service temperature is between -55 °C and +110 °C. This product is available in black color only.

  • Approval according to ESI-09-11, VDE 0278-95

Heat shrinkable tubing CFW 3:1 thick wall, flame retardant

This is a thick wall (CFW) heat shrink tubing made of radiation crosslinked polyolefin with a hot melt adhesive coating on the inside. It is ideal for protecting cable sleeves and terminations up to 600 V. The shrink ratio of the CFW shrink tubing is approx. 3:1, the shrink temperature is above +120 °C and the continuous service temperature is between -55 °C and +110 °C. This product is only available in black.

  • Approval according to ESI-09-11, VDE 0278-95.

Heat shrinkable tubing CCB 3:1 thick wall, flame retardant, branch joints

This shrink-on branch joint is made of radiation crosslinked polyolefin with an internal hot melt adhesive coating. The continuous operating temperature is between -35 °C and +100 °C and the shrink temperature is over +120 °C. The CCB shrink tubing is available exclusively in black and is flame retardant.

Shrink cap and dividing cap 3:1

Heat shrinkable tubing CEC 3:1 thick wall, flame retardant, end caps

This is a shrink-on end cap with an internal hot melt adhesive coating, made of radiation crosslinked polyolefin. The continuous use temperature of the heat shrinkable CEC is between -35 °C and +100 °C and the shrink temperature is above +120 °C. The product is available in black color and is flame retardant.